Forum Index > General > Ask an Evil Mad Scientist!
 Resources for getting started
 |  Printable Version
By: Anonymous: cwidhelm () on Tuesday, September 11 2007 @ 06:52 PM PDT (Read 3825 times)  
Anonymous: cwidhelm

Fabrication and DIY electronics projects are new to me. I am feeling a bit overwhelmed and wondering if anyone has a good recommendation on getting started.

I have a project in mind that I would like to do that involves LEDs, audio and either a touch sensitive surface or a motion/proximity sensitive surface.

Any suggestions on where to start for reading, examples, etc.. would be great.

TIA





       
   
By: Windell (offline) on Wednesday, September 12 2007 @ 01:06 AM PDT  
Windell

Your question is actually a common one. If you're not already into making things, it's easy to get overwhelmed looking at how to construct a project. It sounds like your project is pretty involved and ties together a number of different technologies. So... there are a couple of ways that you can go. One is to find a mentor-- someone that's already used to thinking about these sorts of problems. The other is to attack the problems yourself, one at a time. You want to use LEDs-- do you know how to use one? Attack that problem first, and be sure that you really *do* understand how to use them. If you don't, ask Google, look at some simple LED projects that have clear explanations, and so on. The Make Blog and its discussion forums are great places to look for help as well. Next, you'll need to learn about sensors, and finally you'll need to figure out how you want to tie it all together. If you want to use a microcontroller for that, we have some resources for that here even. If you come up with more specific questions, you're welcome to ask them here, and we'll try to help. But, it's difficult to give anyone help "in general" rather than on a specific problem.


Windell H. Oskay
drwho(at)evilmadscientist.com
http://www.evilmadscientist.com/

Forum Evil Scientist
Evil Scientist

Status: offline

Registered: 06/15/06
Posts: 1932
Sunnyvale, CA

Profile Email Website  
   



 All times are PDT. The time is now 03:09 AM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to Post 
Filtered HTML Allowed 
Censored Content 

Evil Mad Scientist Forum Archives — Read only!

Please visit our new forums for new discussions.


DIY Hardware for Electronic Art


The Original Egg-Bot Kit


Octolively
Interactive LED kits


Meggy Jr RGB
LED matrix game
development kit.


Business-card sized
AVR target boards


Peggy 2
LED Pegboard kits

My Account






Lost your password?