Forum Index > Projects > Larson Scanner kit and LED Menorah kit support
 Want to use the mini menorah for something else.
 |  Printable Version
By: Anonymous: buickciti () on Monday, February 16 2009 @ 10:43 PM PST (Read 2823 times)  
Anonymous: buickciti

I am working on a sculptural work and want to use the mini lights in the interior of a wax sculpture. Any ideas on how to make this possible?





       
   
By: Windell (offline) on Monday, February 16 2009 @ 11:27 PM PST  
Windell

No problem-- just use wires to connect the LEDs to the microcontroller instead of hooking it up directly. The temperature of molten wax (well under 200 C, usually) isn't high enough to destroy the LEDs or the chip, and it won't melt solder.


Windell H. Oskay
drwho(at)evilmadscientist.com
http://www.evilmadscientist.com/

Forum Evil Scientist
Evil Scientist

Status: offline

Registered: 06/15/06
Posts: 1932
Sunnyvale, CA

Profile Email Website  
   



 All times are PDT. The time is now 09:42 PM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to Post 
Filtered HTML Allowed 
Censored Content 

Evil Mad Scientist Forum Archives — Read only!

Please visit our new forums for new discussions.


DIY Hardware for Electronic Art


The Original Egg-Bot Kit


Octolively
Interactive LED kits


Meggy Jr RGB
LED matrix game
development kit.


Business-card sized
AVR target boards


Peggy 2
LED Pegboard kits

My Account






Lost your password?