Forum Index > General > Ask an Evil Mad Scientist!
 Completely new: How to make a simple, tiny, counter?
 |  Printable Version
By: Anonymous: -Q- () on Wednesday, January 13 2010 @ 11:38 PM PST (Read 1727 times)  
Anonymous: -Q-

Hello! I am looking for help on my project. What I would like to build is a system of say 3-5 LEDs, perhaps different colors with two buttons. Press Button 1 to turn on an additional LED until they are all on and a single press of Button 2 would turn off an additional LED until all are off. I'd like to do this with the smallest components possible, like MicroLEDs and MicroButtons, and those wide flat batteries.
Alternately but less preferred would be a similar system where the two buttons drive a one digit LED display, though I think that would end up being too big. I could probably make that maybe workable using an LED watch with the date setting function, but I don't know how I'd force the watch to remain in "set date mode" even if I could find one with LEDs (instead of LCD) and with an up and down button for setting (compared to typical up only with number wrap)

Any help or advice would be greatly appreciated. I've been quite surprised at how hard it's been to learn how to do something that seems so simple. Big Grin

Thanks much!






       
   
By: Windell (offline) on Thursday, January 14 2010 @ 06:01 PM PST  
Windell

Consider using something like a Boarduino, maybe? It's small. Or a Teensy 2.0?


Windell H. Oskay
drwho(at)evilmadscientist.com
http://www.evilmadscientist.com/

Forum Evil Scientist
Evil Scientist

Status: offline

Registered: 06/15/06
Posts: 1932
Sunnyvale, CA

Profile Email Website  
   



 All times are PDT. The time is now 09:15 PM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to Post 
Filtered HTML Allowed 
Censored Content 

Evil Mad Scientist Forum Archives — Read only!

Please visit our new forums for new discussions.


DIY Hardware for Electronic Art


The Original Egg-Bot Kit


Octolively
Interactive LED kits


Meggy Jr RGB
LED matrix game
development kit.


Business-card sized
AVR target boards


Peggy 2
LED Pegboard kits

My Account






Lost your password?