Forum Index > Projects > Diavolino
 Diavolino 3V3 mod
 |  Printable Version
By: damurdock (offline) on Monday, July 18 2011 @ 09:00 PM PDT (Read 1435 times)  
damurdock

So, I bought a Diavolino kit with all the bells and whistles last week, and just now got around to assembling it. Some of the shields I want to use need 3.3 volts, so I grabbed a spare LD33V regulator and hacked it in. I soldered wires to VIN (at the regulator bypass jumper), Ground (at the battery input), and 3V3 (at the 3V3-VCC jumper). The completed mod is below, and the full photoset (with notes) is over at http://www.flickr.com/photos/damurdock/sets/72157627228948638/.


Finished! by damurdock, on Flickr


Forum Apprentice
Apprentice


Status: offline

Registered: 07/18/11
Posts: 1

Profile Email    
   



 All times are PDT. The time is now 09:05 AM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to Post 
Filtered HTML Allowed 
Censored Content 

Evil Mad Scientist Forum Archives — Read only!

Please visit our new forums for new discussions.


DIY Hardware for Electronic Art


The Original Egg-Bot Kit


Octolively
Interactive LED kits


Meggy Jr RGB
LED matrix game
development kit.


Business-card sized
AVR target boards


Peggy 2
LED Pegboard kits

My Account






Lost your password?