Forum Index > Projects > Micro-readerboard project support
 Build from scratch
 |  Printable Version
By: Anonymous: Todds () on Saturday, May 19 2007 @ 10:56 PM PDT (Read 5322 times)  
Anonymous: Todds

It looks like you are sold out for now. Is there a guide that I may download so I may build from scratch?
Thanks,
Todd





       
   
By: Windell (offline) on Sunday, May 20 2007 @ 03:16 PM PDT  
Windell

For the "1.0" kits, the instructions and code are still up at this location. I'll be posting instructions and code for the new "2.0" version within a matter of days.


Windell H. Oskay
drwho(at)evilmadscientist.com
http://www.evilmadscientist.com/

Forum Evil Scientist
Evil Scientist

Status: offline

Registered: 06/15/06
Posts: 1932
Sunnyvale, CA

Profile Email Website  
   
By: Anonymous: Hale () on Saturday, May 26 2007 @ 04:32 PM PDT  
Anonymous: Hale

Hey this is a bit related... but at the Maker Faire i was able to purchase one of the reader boards... and the instructions werent in the bag although I saw other peeps with instructions.... is there any difference between the holiday one and the maker faire one?





       
   
By: Windell (offline) on Sunday, May 27 2007 @ 01:28 AM PDT  
Windell

I'm sorry that the instructions weren't in your bag; someone must have pinched them-- I personally checked that every single bag had instructions when we shipped them!

The readerboards that were sold at Maker Faire are the completely revised version 2.0 readerboards (which we haven't really posted about yet), and the instructions are indeed quite different. You can recognize these kits because the LED display has black (not grey) paint on the front.

You can download the instructions for the version 2.0 readerboard here. (400 kB PDF)
We're putting together more detailed technical information about them, which will be put online in the near future.


Windell H. Oskay
drwho(at)evilmadscientist.com
http://www.evilmadscientist.com/

Forum Evil Scientist
Evil Scientist

Status: offline

Registered: 06/15/06
Posts: 1932
Sunnyvale, CA

Profile Email Website  
   
By: Anonymous: Hale () on Sunday, May 27 2007 @ 06:00 AM PDT  
Anonymous: Hale

Thanks, probably wasn't your fault... my brother picked it up for me and he loves taking out and reading instructions...





       
   



 All times are PDT. The time is now 08:10 PM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to Post 
Filtered HTML Allowed 
Censored Content 

Evil Mad Scientist Forum Archives — Read only!

Please visit our new forums for new discussions.


DIY Hardware for Electronic Art


The Original Egg-Bot Kit


Octolively
Interactive LED kits


Meggy Jr RGB
LED matrix game
development kit.


Business-card sized
AVR target boards


Peggy 2
LED Pegboard kits

My Account






Lost your password?