|
|||||||
 |
Forum Index > Projects > Other projects | ||
 Using ATtiny2313 Target Board for ATtiny25/45/85 |
|||
| | | Printable Version |
|
JChristensen | ||||||||
|
I've used the EMS target boards for ATmega328 and ATtiny2313, and I like them a lot. Today I wanted a target board for the ATtiny85, and I realized the ATtiny2313 board can serve just by adding a jumper wire. Maybe someone else has already done this. Photo and description on flickr. If a switch or movable jumper were used, then the same board could work with 2313/4313 and 25/45/85. |
 Apprentice Status: offline
Registered: 10/30/11 |
||||||||
|
|
||||||||
|
Windell | ||||||||
|
Yes indeed! Windell H. Oskay drwho(at)evilmadscientist.com http://www.evilmadscientist.com/ |
 Evil Scientist  Status: offline
Registered: 06/15/06 |
||||||||
|
|
||||||||
|
|
| All times are PDT. The time is now 10:48 AM. |
|
|
Octolively
Interactive LED kits
Meggy Jr RGB
LED matrix game
development kit.
Business-card sized
AVR target boards
Peggy 2
LED Pegboard kits
