Forum Index > Projects > Larson Scanner kit and LED Menorah kit support
 Larson Scanner Properly used :)
 |  Printable Version
By: Anonymous: Tannim31 () on Friday, December 23 2011 @ 11:33 AM PST (Read 1436 times)  
Anonymous: Tannim31

Hello fellow Evil Mad Scientists!! I have looked long and hard over the years for a suitable scanner for my projects and finally came across EvilMadScience.comIdea (I bow to you EMS.com! ) Easy to mod and reconfigure, the Larson Scanner was the ticket to my two latest projects! KITT and KARR in 1/15 scale!Big GrinBig GrinBig Grin This image is before the Larson scanner installation... image So here is a video of KITT with the finished Larson Scanner installed and working (I apologize in advance for my lackluster video skills lol) I used 7 out of the 9 LED ports (omitting D0 and D8) and the result was still a flawless scan Smile I also used my own LEDs due to space restriction of the front aperture. I relocated the mode switch to the rear of the car off the PCB along side the remote power switch for the LS. KARR will be getting the same treatment in yellow LEDs Big GrinBig GrinBig Grin






       
   
By: Anonymous: Tannim31 () on Friday, December 23 2011 @ 11:39 AM PST  
Anonymous: Tannim31

I just realized I prolly put this in the wrong section. My Apologies if I did.






       
   



 All times are PDT. The time is now 11:09 PM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to Post 
Filtered HTML Allowed 
Censored Content 

Evil Mad Scientist Forum Archives — Read only!

Please visit our new forums for new discussions.


DIY Hardware for Electronic Art


The Original Egg-Bot Kit


Octolively
Interactive LED kits


Meggy Jr RGB
LED matrix game
development kit.


Business-card sized
AVR target boards


Peggy 2
LED Pegboard kits

My Account






Lost your password?