Forum Index > Projects > Larson Scanner kit and LED Menorah kit support
 |  Printable Version
By: Anonymous: dtolin () on Wednesday, December 17 2008 @ 05:16 PM PST (Read 2948 times)  
Anonymous: dtolin

Thanks for the great little kit. It was fun.

I made a couple of additions that I wanted to let you know about.

First of all I mounted the chip to the top of the battery pack with the wires rerouted up through the middle,

Also, I noticed that with nothing to reflect onto a lot of the light from the LED's shoots straight up. What I did was add drops of hot glue to the tops of the LED's. The drops look like candle flames and glow like crazy compared to the LED by itself.

Here is a link to a picture:

By: Windell (offline) on Wednesday, December 17 2008 @ 06:04 PM PST  

It's beautiful! One of the best examples that I've seen.

Windell H. Oskay

Forum Evil Scientist
Evil Scientist

Status: offline

Registered: 06/15/06
Posts: 1932
Sunnyvale, CA

Profile Email Website  
By: Anonymous: dtolin () on Monday, December 22 2008 @ 10:58 AM PST  
Anonymous: dtolin

Here is a pic of my second Menorah with the 3mm LEDs and hot glue on the tips of the LEDs.



 All times are PDT. The time is now 03:22 AM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to Post 
Filtered HTML Allowed 
Censored Content 

Evil Mad Scientist Forum Archives — Read only!

Please visit our new forums for new discussions.

DIY Hardware for Electronic Art

The Original Egg-Bot Kit

Interactive LED kits

Meggy Jr RGB
LED matrix game
development kit.

Business-card sized
AVR target boards

Peggy 2
LED Pegboard kits

My Account

Lost your password?